Oki B2520MFP B2520 MFP/B2540 MFP User's Guide (Amer Eng) - Page 66

Maintenance

Page 66 highlights

Maintenance Service General information B2520 / B2540 4 Raise and remove the toner cartridge from the machine. 5 Unpack the new cartridge and insert it into the slot as indicated in the diagram below. For your safety, it is imperative to refer to the security directives presented in the Safety booklet. To ensure that your machine is kept in the best condition, it is recommended that you periodically clean the inner parts. Please respect the following rules while using this machine: - Do not leave the scanner cover open. - Do not try to lubricate the device. - Do not close the scanner cover violently or do not apply vibrations to the machine. - Do not open the cartridge access cover while printing. - Do not try to disassemble the machine - Do not use paper which has stayed in the tray for too long. Toner cartridge replacement Your machine comes with a current consumable management system. It tells you if your toner cartridge is close to its end of cycle. The following message will appear on your machine screen. TONER NEAR END 6 Close the cover. The following message appears: HAVE YOU CHANGED THE TONER? 7 Press OK. 8 When this message appears, INSERT THE TONER CARD insert the smart card provided with the new toner cartridge as shown on the picture below. After this message has been displayed, you are able to change the cartridge. To quit this screen, press OK. To replace the toner cartridge, proceed as shown below. 9 A wait message appears. PLEASE WAIT The smart card is read. NEW TONER REMOVE CARD When the following message is displayed on the screen: TONER EMPTY REPLACE 1 Press OK. OPEN FRONT COVER REPLACE TONER 2 Stand in front of the device. 3 Push on the left and right sides of the cover and pull it towards you. Remove the smart card from the reader, your machine is ready to print again. Issues with smart cards If you use a smart card that has already been used, the machine will display: PLEASE WAIT then, REMOVE CARD ALREADY USED - 66 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73

B2520 / B2540
- 66 -
Maintenance
Service
General information
To ensure that your machine is kept in the best
condition, it is recommended that you periodically
clean the inner parts.
Please respect the following rules while using this
machine:
- Do not leave the scanner cover open.
- Do not try to lubricate the device.
- Do not close the scanner cover violently or do
not apply vibrations to the machine.
- Do not open the cartridge access cover while
printing.
- Do not try to disassemble the machine
- Do not use paper which has stayed in the tray
for too long.
Toner cartridge replacement
Your machine comes with a current consumable
management system. It tells you if your toner
cartridge is close to its end of cycle. The following
message will appear on your machine screen.
To quit this screen, press
OK
.
To replace the toner cartridge, proceed as shown
below.
When the following message is displayed on the
screen:
1
Press
OK
.
2
Stand in front of the device.
3
Push on the left and right sides of the cover
and pull it towards you.
4
Raise and remove the toner cartridge from
the machine.
5
Unpack the new cartridge and insert it into
the slot as indicated in the diagram below.
6
Close the cover.
The following message appears:
7
Press
OK
.
8
When this message appears,
insert the smart card provided with the new
toner cartridge as shown on the picture
below.
9
A wait message appears.
The smart card is read.
Remove the smart card from the reader,
your machine is ready to print again.
Issues with smart cards
If you use a smart card that has already been
used, the machine will display:
then,
For your safety, it is imperative to refer
to the security directives presented in
the
Safety
booklet.
TONER NEAR
END
After this message has been displayed,
you are able to change the cartridge.
TONER EMPTY
REPLACE <OK>
OPEN FRONT
COVER
REPLACE TONER
HAVE YOU
CHANGED
THE TONER? <OK>
INSERT THE
TONER CARD
PLEASE
WAIT
NEW TONER
REMOVE CARD
PLEASE
WAIT
REMOVE CARD
ALREADY USED