Oki B6100n Guide: Administration and Installation, B6100 UNIX Printing Softwar - Page 50
Create a Temporary Directory, Mount the CD-ROM on an IBM/AIX System
View all Oki B6100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 3: Installing and Configuring UNIX Printing Software on an IBM/AIX System 2. Enter the super user password. Press RETURN. Create a Temporary Directory You must make a temporary directory for the UNIX Printing Software kit. Instructions are as follows: i You must have super user privileges to complete this task. Refer to the section, "Super User Privileges" on page 3-43 for instructions on how to become a super user. 1. Enter the following command at the command line. Press RETURN. # mkdir /tmp/install 2. Enter the following command at the command line. Press RETURN. # cd /tmp/install 3. Your next step is to mount the CD-ROM. Refer to the next section, Mount the CD-ROM for instructions on how to accomplish this task. Mount the CD-ROM on an IBM/AIX System Instructions on how to mount the CD-ROM on an IBM/AIX System are as follows i You must have super user privileges to complete this task. Refer to the section, "Super User Privileges" on page 3-43 for instructions on how to become a super user. Instructions are as follows: 1. Create a directory to serve as the mounting point for the CD-ROM. Refer to the section "Create a Temporary Directory" on page 3-44 for instructions on how to complete this task. Note: Your CD device file will most likely be /dev/cdo. 2. Mount the device on the mount point by entering the following command: # /usr/sbin/mount -v cdrfs -r /dev/cdo /mycdrom where -r is read only. where -v cdrfr is the cd file system type. where /dev/cdo is the CD-ROM device file 3-448/25/02 UNIX Printing Software Administration and Installation Guide