Oki B6100n Guide: Administration and Installation, B6100 UNIX Printing Softwar - Page 52
Mount the CD-ROM on an IBM/AIX System Using SMIT, Directory Over Which to Mount
![]() |
View all Oki B6100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 3: Installing and Configuring UNIX Printing Software on an IBM/AIX System Mount the CD-ROM on an IBM/AIX System Using SMIT To mount a CD-ROM on an IBM/AIX system using SMIT, follow the instructions below: 1. Enter the following command at the command line: # SMIT The System Management Window appears 2. Click the Devices button. 3. Click the CD-ROM select button. The CD-ROM Select Popup appears , displaying a top and lower box. The lower box contains the same output as that generated by the CLI version of lsdev. 4. Click Done. 5. Click the System Management button. 6. Click the System Storage Management button. 7. Click the File Systems button. 8. Click the Mount a File System button. A window appears. 9. From the File System Name field, click the List Button. A window appears. 10. Select the device file name. Note: Typically, the CD-ROM device file name is the same as the first three characters included at the beginning of Step 3 (i.e., cdo). If so, the device file is /dev/cdo. 11. From the Directory Over Which to Mount field, click the List Button. A window appears. 12. Select the directory that was created for the mount point. 13. From the Type of File System field, click the List Button. 14. Select cdrfs from the list. 15. Select n to force the mount. The default values for the remaining fields are valid entries, and do not need to be updated, unless specifically required by your system. 3-468/25/02 UNIX Printing Software Administration and Installation Guide
![](/manual_guide/products/oki-data-b6100-guide-administration-installation-b6100-unix-printing-software-e69dc80/52.png)