Oki B6300 B6200/6300 Technical Reference/User's Guide - Page 109
This printer can process PCL-XL, PCL-5e, ESC/P, HP-GL, HP-GL/2, TIFF and PDF data.
View all Oki B6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Error code 016-752 016-753 016-755 016-761 016-762 016-796 016-797 016-799 116-701 116-702 116-703 116-710 116-714 116-720 116-740 Reason/Action Cannot print PDF file due to insufficient memory. Change the [Print Mode] in [PDF] on the control panel: • When [High Quality] is selected, change to [Normal]. • When [Normal] is selected, change to [High Speed]. Refer to • "PDF" (P. 58) Password for the PDF file is different from the one set in the printer. Set the correct password on the control panel, and print again. Refer to • "PDF" (P. 58) Cannot print PDF file that does not have print permission. Use Adobe Acrobat to cancel print prohibit settings in the PDF file, and print again. Refer to • Adobe Acrobat related manuals Error in image processing. When [1200dpi] is selected for [Print Mode] in the [Graphics] tab, set it to [600dpi] and print again. If this fails, set [Page Print Mode] on the [Detailed Settings] tab to [On], and print again. Refer to • [Print Mode] / [Page Print Mode]: On-line Help for the printer driver Uninstalled printer language selected. This printer can process PCL-XL, PCL-5e, ESC/P, HP-GL, HP-GL/2, TIFF and PDF data. E-mails without attachments are deleted when selections to print only the attachments of received e-mails are specified. To print both the e-mail and the mail header, change the settings in [Network] of OkiWebRemote. E-mail sent to this printer using E-mail Print feature has a wrong address. Specify the correct address and send again. Refer to • "2.10 Printing via Electronic Mail - E-mail Printing" (P. 38) Wrong combination of print parameters, like selecting to print on custom size paper and setting [Auto] for [Paper Source] on the printer driver and [Auto] for [Paper Size] in trays 1 to 4 on the control panel. Check the print parameters. Cannot perform 2 sided printing due to insufficient memory. You are recommended to increase the memory. The job was printed using substitute fonts. Check the print data. Error in PostScript. Check the print data or uncheck the bi-directional communication check box of the printer driver. Received data has exceeded the spool size of HP-GL and HP-GL/2. The printer may not be able to determine the original size accurately. Increase the auto layout memory allocation for HP-GL and HP-GL/2 or install the hard disk (optional). Command error in HP-GL and HP-GL/2. Check the print data. Cannot print due to insufficient PCL memory. Disable unnecessary ports or adjust the buffer size for each memory. You are also recommended to increase the memory. Numeric data error has occurred as a number exceeding the printer limit value has been used in the print data. Check the print data. 5.4 Message List 105