Oki B6500dn B6500 Network Guide - Page 54

The printer is not printing

Get Oki B6500dn PDF manuals and user guides View all Oki B6500dn manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

WHEN USING UNIX The printer is not printing CAUSE VERIFICATION ACTION Incorrect IP address. Error occurs on the network connecting the workstation and the printer. Unable to set the correct printer entry on the workstation. The printer is in the offline status. If LPD spool is set to [On], the print data sent by the user in a single print instruction has exceeded the remaining storage capacity of the destination device. An irrecoverable error has occurred during print. The data format of the print job does not conform to the printing environment of the workstation. (Print data from the client contains TBCP.) Ask the network administrator to check if the IP address is correct. Activate the network test mode (ping) on the workstation to check the communication status. Check and correct the printer entry settings on the workstation. Check the/etc/printcap file on the workstation or use the "lpstat" command to troubleshoot. Check whether "Off-line" is displayed on the printer control panel. Check the remaining storage capacity of the destination device. Check the error message on the printer control panel. - Set up the correct IP address for the printer. As the network administrator to look into the network failure. Re-enter the correct printer entry. Press the button. 1. If single print data has exceeded the storage capacity of the destination device, free space on the device, or split the file into smaller ones to keep them below the remaining storage space. 2. If multiple files have exceeded the storage of the destination device, reduce the number of files which can be sent at a time. Switch off the printer, then switch it on again. Specify PSASC on the client side to print data containing TBCP by the PostScript language. B6500 Network Guide> 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
B6500 Network Guide> 54
W
HEN
U
SING
U
NIX
The printer is not printing
CAUSE
VERIFICATION
ACTION
Incorrect IP address.
Ask the network admin-
istrator to check if the IP
address is correct.
Set up the correct IP
address for the printer.
Error occurs on the
network connecting
the workstation and
the printer.
Activate the network test
mode (ping) on the
workstation to check the
communication status.
As the network adminis-
trator to look into the
network failure.
Unable to set the cor-
rect printer entry on
the workstation.
Check and correct the
printer entry settings on
the workstation. Check
the/etc/printcap file on
the workstation or use
the “lpstat” command to
troubleshoot.
Re-enter the correct
printer entry.
The printer is in the
offline status.
Check whether “Off-line”
is displayed on the
printer control panel.
Press the <ON LINE>
button.
If LPD spool is set to
[On], the print data
sent by the user in a
single print instruction
has exceeded the
remaining storage
capacity of the desti-
nation device.
Check the remaining
storage capacity of the
destination device.
1. If single print data has
exceeded the storage
capacity of the destina-
tion device, free space
on the device, or split
the file into smaller ones
to keep them below the
remaining storage space.
2. If multiple files have
exceeded the storage of
the destination device,
reduce the number of
files which can be sent at
a time.
An irrecoverable error
has occurred during
print.
Check the error message
on the printer control
panel.
Switch off the printer,
then switch it on again.
The data format of the
print job does not con-
form to the printing
environment of the
workstation. (Print
data from the client
contains TBCP.)
-
Specify PSASC on the cli-
ent side to print data
containing TBCP by the
PostScript language.