Oki C6150n C6150 User's Guide (English) - Page 203

• RGB Source Profile • Simulation Target Profile • Printer Output Profile (optional) Once the profile(s) have been downloaded, make the appropriate selections in the printer driver. These are described in the next section (Windows page 203, Mac OS 9 page 204, Mac OS X page 205). Windows This information applies to the Windows PCL 5c, PCL 6 and PostScript drivers. If you are using a source RGB document, simulate the output of another printer by making the following selections in the printer driver: 1. On the printer driver [color] tab, select [Graphic Pro] and click [Options]. 2. Select [Printer Simulation]. 3. Select the ICC profile that corresponds to the device used to capture or display your source document - this could be a monitor, scanner or digital camera. Remember that the names "RGB Source 1", "RGB Source 2" and so on relate to the number assigned to the profile using Profile Assistant. See "Using Profile Assistant" on page 198. 4. Select a Simulation Target Profile. This profile corresponds to the printer you want to simulate. If you wish to produce black and grey colors that are printed using only black toner, enable the [Preserve Black] option. Although this produces a better quality print, the black and grey colors will not be simulated accurately. 5. Select your printer output profile. If [Auto] is selected, the factory default profiles that are embedded in the printer will be used. If you have created a printer profile yourself using profile creation software, select it here and choose a rendering intent. C6150 User's Guide 203