Oki C6150n C6150 User's Guide (English) - Page 99

USB Menu Note: Factory default settings are shown in bold. Item SOFT RESET SPEED SERIAL NUMBER Settings ENABLE DISABLE 480Mbps 12Mbps ENABLE DISABLE Explanation Enables or disables the SOFT RESET command. Sets the maximum transfer speed for the USB interface. ENABLE allows your computer to identify the printer by its USB interface serial number. Network Menu Note: Factory default settings are shown in bold. Item TCP/IP NETBEUI IP ADDRESS SET Settings ENABLE DISABLE ENABLE DISABLE AUTO MANUAL IP ADDRESS xxx.xxx.xxx.xxx Default = 198.168.100.100 SUBNET MASK xxx.xxx.xxx.xxx Default = 255.255.255.000 GATEWAY ADDRESS xxx.xxx.xxx.xxx Default = 192.168.100.254 Factory Default [EXECUTE] Explanation Enables or disables this network protocol. Enables or disables this network protocol. Change this to Manual to specify the IP address through the front panel (see next entry). Required for non-DHCP networks. Current assigned IP address. To change: • Press ENTER. • Use +/- keys to increment first octet. • Press ENTER to move on to the next octet. • Repeat for each octet. • Press ENTER to register the new address. Current assigned subnet mask. To change, proceed as above. Current assigned gateway address. To change, proceed as above. Initializes the network card. C6150 User's Guide 99