Oki MC770 MC770/780 Setup Guide - Page 26

Installation Conditions ••Installation Conditions QQOperating Environment Your machine must be placed in the following environment: Temperature: Humidity: 1 Maximum wet bulb temperature 10 - 32 °C 20% - 80% RH (relative humidity) 25 °C Note ••Avoid condensation. It may cause a malfunction. 2 ••If your machine is in a location where the humidity is 30% RH or less, use a humidifier or antistatic mat. 3 4 5 6 QQInstallation Precautions WARNING ••Do not install the machine near high temperatures or fire. ••Do not install the machine in places where chemical reactions are performed, such as a laboratory. ••Do not install the machine near flammable liquids, such as alcohol and paint thinner. ••Do not install the machine where young children might get hands or fingers caught in the machine's parts. ••Do not install the machine in an unstable place, such as a shaky stand or uneven surfaces. ••Do not install the machine in places with high humidity, dust, or direct sunlight. ••Do not install the machine in places with briny air or corrosive gas. ••Do not install the machine in places which experience a lot of vibration. ••Do not install in places where the ventilation holes of the machine will be blocked. CAUTION ••Do not place the machine directly on high pile rugs or carpets. ••Do not install the machine in a closed room with poor ventilation. ••If using the machine in a small room for extended periods, make sure that the room is well ventilated. ••Install the machine away from strong magnetic fields and sources of noise. Install the machine away from monitors or TVs. ••••When moving the machine, make sure that you support it from both sides. ••At least three people are needed to safely lift the machine, due to its weight. ••If you intend to perform a large print job or use the machine continuously for extended periods, make sure that the room is well ventilated. - 26 -