Oki MC770 MC770/780 Setup Guide - Page 67

Configuring the tray cassette Match the tray cassette to the loaded paper. Refer to the following table and configure paper type and thickness by using the operator panel. Complete the settings by pressing the [SETTING] button, and then [TRAY] - [PAPER TYPE]. Paper Type Paper Thickness Plain Paper Envelope Label 64-82g/m2 83-105g/m2 106-128g/m2 129-200g/m2 0.1 to 0.17 or less. 0.17-0.2mm Setting value for the operator Setting of the panel [Paper Thickness] Paper Thickness Paper Type*1 of the Printer Driver:*2 1 Plain Paper Plain Paper Plain Paper Heavy Paper Heavy Paper Ultra Heavy 1 Paper Ultra Heavy 1 Paper Ultra Heavy 2 Paper Ultra Heavy 2 Paper - - - Ultra Heavy 1 Paper Label Label 1 2 Ultra Heavy 2 Paper Label 2 *1: T his is configured to [Plain Paper] at the time of shipment from the factory. *2: Y ou can configure the paper thickness and paper type by using the operator panel or the printer driver. If you use the printer driver, the printer driver settings take precedence. If [Automatic Selection] is selected as the [Paper Source] of the printer driver or [Printer Settings] is selected as the [Paper Thickness], the operator settings take precedence. 3 *3: T he printable thickness for duplex printing is 64 to 105 g/m2. *4: N o setting is required for envelopes. Memo ••If paper thickness is set to Ultra Heavy 1 or Ultra Heavy 2 and paper type is set to [Label], the printing speed becomes slower. 4 5 6 - 67 -