Oki X400 X400 User's Guide - English - Page 10

Loading Labels or Tags

Get Oki X400 PDF manuals and user guides View all Oki X400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Loading Labels or Tags 1. Lift the top cover. 2. Press the two print head releases down to unlock the print head. 3. Unwind a few labels from the roll. Labels should be wound face-in for the best results. 4. Slide the center justified paper holders apart until the label roll will drop down between them. 5. The paper holdersare spring loaded and will automatically retract when released. Make sure the label holder spindles fit inside the label roll core and the roll spins freely. 6. Lock the paper holders in place by pressing down on the purple lock tab on the left paper holder. 7. Place media roll in the paper tray such that the media unwinds from the bottom of the roll toward the front of the printer. The label image surface must face up as it passes under the print head. 8. Move the purple paper guides in place to fix the label position. they should lightly contact the outside edges of the label backing. Make sure the label material is routed beneath the guides. 9. Slip the free end of the media under the print head and out the front paper exit. 10. Lower the print head and press it down firmly until it locks closed on both sides. 11. Close the top cover. 12. Wait until the ERROR LED stops blinking. Press the FEED button to feed a label or to resume printing. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
Loading Labels or Tags
1.
Lift the top cover.
2.
Press the two print head releases down to unlock the print head.
3.
Unwind a few labels from the roll. Labels should be wound face-in
for the best results.
4.
Slide the center justified paper holders apart until the label roll will
drop down between them.
5.
The paper holdersare spring loaded and will automatically retract
when released. Make sure the label holder spindles fit inside the
label roll core and the roll spins freely.
6.
Lock the paper holders in place by pressing down on the purple lock
tab on the left paper holder.
7.
Place media roll in the paper tray such that the media unwinds from
the bottom of the roll toward the front of the printer. The label
image surface must face up as it passes under the print head.
8.
Move the purple paper guides in place to fix the label position. they
should lightly contact the outside edges of the label backing. Make
sure the label material is routed beneath the guides.
9.
Slip the free end of the media under the print head and out the front
paper exit.
10.
Lower the print head and press it down firmly until it locks closed
on both sides.
11. Close the top cover.
12.
Wait until the ERROR LED stops blinking. Press the FEED button
to feed a label or to resume printing.
8