Oki X400 X400 User's Guide - English - Page 24
Parallel Input Cable Centronics 36 pin, Serial Port Parameters
View all Oki X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Parallel Input Cable (Centronics 36 pin) Pin # 1 2~9 10 11 12 13 16 17 18 19~30 32 Description STROBE Data bits 0-7 ACK Busy PE (Paper End) Select, always high Signal Ground Chassis Ground +5V DC Ground Fault Serial Port Parameters OKIPOS X400 printers are configured as Data Terminal Equipment (DTE) equipment, and use Request-To-Send/Clear-To-Send (RTS/CTS) handshaking or X-On/X-Off flow control (control characters are DC2 and DC4). The serial port supports the following parameters: Speed 9600,19200 or 38400 bps Parity Odd, Even or None Data Bits 7 or 8 bits Stop Bit(s) 1 or 2 Default Parameters 9600 bps, No parity, 8 data bits, 1 stop bit 22
Parallel Input Cable (Centronics 36 pin)
Pin #
Description
1
STROBE
2~9
Data bits 0-7
10
ACK
11
Busy
12
PE (Paper End)
13
Select, always high
16
Signal Ground
17
Chassis Ground
18
+5V DC
19~30
Ground
32
Fault
Serial Port Parameters
OKIPOS X400 printers are configured as Data Terminal Equipment
(DTE) equipment, and use Request-To-Send/Clear-To-Send (RTS/CTS)
handshaking or X-On/X-Off flow control (control characters are DC2
and DC4). The serial port supports the following parameters:
Speed
9600,19200 or 38400 bps
Parity
Odd, Even or None
Data Bits
7 or 8 bits
Stop Bit(s)
1 or 2
Default Parameters
9600 bps, No parity, 8 data bits, 1
stop bit
22