Olympus 202348 Reference Manual - Page 22

Troubleshooting Macintosh PROBLEM The status lamp does not light. 1 No card icon appears on the computer's screen. 2 The status lamp goes out after lighting. 3 You can read a card, but not write 4 to it. CAUSE The adapter is not connected correctly to the computer's USB port. The power supply from the USB port is insufficient. The card is not inserted correctly. The card is not inserted correctly. File Exchange is not installed on your computer. (Mac OS 9) The card is not recognized correctly. There is a problem with the card. SOLUTIONS REF. PAGE Make sure that the adapter is facing the right way and connect it to the computer's USB port firmly. If you are using a USB hub, connect the adapter directly to the computer's USB port. Make sure the card is properly oriented (front/reverse face, top/ bottom part), then insert it slowly into the adapter until it is secure. Make sure the card is properly oriented (front/reverse face, top/ bottom part), then insert it slowly into the adapter until it is secure. You must have File Exchange (provided with Mac OS) to read/ write a DOS/Windows formatted card. (Check Control Panels under the Apple menu to see if File Exchange is installed. For more details, refer to Mac OS [Help].) Disconnect the adapter from the computer, pull the card out of the adapter, then wipe the contact area with a dry cloth, and insert the card again. If the problem persists, the card may be damaged. Save the data to another storage medium, then use the new card for writing. 14, 18 6 13, 17 13, 17 13 15, 19 - 22