Olympus 300 Digital Stylus 300 Digital Reference Manual (English) - Page 122
set All Reset to OFF. - clock
UPC - 050332140202
View all Olympus 300 Digital manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Troubleshooting Pictures you have taken do not appear on the monitor. Possible cause Corrective action The power is off. With the lens barrier closed, press the monitor on. to turn The camera is in the shooting mode. Press quickly twice, or close the lens barrier and then press to switch to the playback mode. There are no pictures on NO PICTURE appears on the monitor. Record the card. pictures. There is a problem with the card. Refer to the "Error codes". The camera is connected The monitor does not function when the video to a TV. cable is connected to the camera. Ref. Page P.26 P.26, 84 - P.117 P.89 The date recorded with the image data is wrong. Possible cause Corrective action The date/time is not set. Set the date/time. The clock adjustment is not factory-preset. The battery is exhausted. When the battery runs down, the date/time setting is canceled or becomes inaccurate. Insert a charged battery and reset the date and time. The camera has been left If the camera is left for about a day with the with the battery removed. battery removed, the date/time setting is canceled. Set the date/time again. Ref. Page P.30 P.18, 30 P.30 The settings are returned to the factory default settings when the camera is turned off. Possible cause All Reset is set to ON. Corrective action Select the SETUP tab in the mode menu and Ref. Page P.101 9 set All Reset to OFF. Remove the battery just Removing the battery just after turning the - after turning the camera camera off may cause the settings to return to off. the factory default settings. Wait a few seconds before removing the battery. Miscellaneous 121