Olympus SP 700 SP-700 Advanced Manual (English) - Page 77
Adding sound to still pictures
UPC - 050332154292
View all Olympus SP 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Adding sound to still pictures Sound can be added to a still picture that you have already taken. You can also re-record over the sound that has already been recorded. Total recording time per picture is approximately 4 seconds. Select the still picture to which you want to add sound and display the top menu. Top menu [MODE MENU] [PLAY] [R] g"Using the menus" (P. 19) 1 Press Y to display [START]. SET MEM PLAY 2 Aim the camera microphone toward the sound you want to record, and press Z to start recording. • The [BUSY] bar is displayed during recording. START 5 Microphone Note • If the microphone is farther than 1 m (3.3 ft.) from the subject, sound may not be recorded properly. • If you re-record the sound, the original sound is erased. • Sound recording is not possible if there is insufficient space in the internal memory or on the card. • The microphone may pick up the sound of buttons operated. • Once sound is added to a picture, it is not possible to erase the sound. In this case, make a re-recording with silence. Playback 77