Omron HR-100C Instruction Manual - Page 19

BATTERY INSTALLATION The monitor watch uses a CR2032 3V Lithium battery. When the battery is running low, will light up. To assure the water resistance take the monitor to a local jewelry store for battery replacement. Improper replacement will void the warranty. The chest belt uses a CR2032 3V Lithium battery. If the heart rate signals become unsteady or stop your chest belt battery may need replacing. To change the chest belt battery: 1. Open the chest belt battery lid with a coin by turning counterclockwise. 2. Remove the old battery. 3. Insert the new battery with the positive side facing up. DO NOT touch the contacts. 4. Replace the battery lid. CARING FOR YOUR MONITOR To keep your heart rate monitor in the best condition and protect the unit from damage follow these directions: • Clean the monitor watch with a soft, slightly moistened cloth. Do not use any abrasive or volatile cleaners. • Always thoroughly dry off any moisture on the components before storing. • Do not subject the monitor watch to extreme hot or cold temperatures, humidity and direct sunlight. • Do not excessively twist or bend the conductive pads on the chest belt. • Do not subject the chest belt or watch to strong shocks, such as dropping on the floor. • Use the unit consistent with the instruction provided in this manual. 19