Onkyo CP-1050 User Manual English - Page 13
Handling
View all Onkyo CP-1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Handling Handling and maintenance of stylus Take due care when handling the stylus as the stylus tip is extremely delicate. Remove any dust attached to the stylus tip using a brush with a soft tip by brushing from the base of the stylus towards the end. You can also use a special cleaner available commercially for cleaning. Replacing the stylus The life-span of the stylus is normally about 500 hours but varies greatly depending on the usage conditions. When the stylus tip is worn out, high frequencies may go out of pitch or the record may be damaged. Promptly replace the stylus in this case. Use a special replacement stylus (DN-105ST) to replace the stylus for the CP-1050. See the manual supplied with the replacement stylus for the replacement method. Maintenance of records Use a commercial record cleaner to wipe the records thoroughly. If the record is dirty, the stylus may be damaged, resulting in noise and jumping sounds. When relocating the unit Repackage the unit in the packaging it came in. If you no longer have the packaging, do the following: 0 Take off the turntable and rubber mat and carefully wrap them. 0 Remove the counterweight and head shell from the tone arm and carefully wrap them. 0 Secure the tone arm with the arm clamp and then tie it with a string so that it does not move. 0 Carefully wrap the unit in a blanket or soft paper. 13