Onkyo CP-1050 User Manual English - Page 7

Assembly and installation Assembly 1. Mounting the turntable and rubber mat 1. Insert the turntable onto the center spindle. 0 Handle the turntable with care so that it does not drop onto or hit the unit, tone arm, etc. 2. Lay the rubber mat on top. 3. Mounting the counterweight Mount the counterweight on the shaft at the back of the tone arm. 0 Do not rotate the counterweight to a position where the white center line on the shaft at the back of the tone arm is no longer visible. Center line Counterweight Rubber mat Turntable Installation Center spindle 2. Mounting the head shell Fit the head shell into the tone arm, keep it horizontal and tighten the locking nut. Head shell Install the unit on a horizontal surface protected from vibrations. 0 Do not place the unit on top of the amplifier or speaker system. 0 Install the unit away from the speaker system so as to avoid the impact of vibrations and acoustic pressure. 0 Ensure the unit is not exposed to direct sunlight, dust, humidity, and heat from a heating appliance. 0 This unit may cause interference to radio broadcast if there is a radio nearby. Keep radios as far as possible from this unit. 0 If you have any devices that emit high-intensity radio waves near the unit, such as a cellular phone that's being used to make a call, the unit may output noise. Adjust the unit horizontally Place the unit where it is to be used and adjust the height of the insulators to make the unit horizontal. Locking nut Insulator 7