Onkyo HT-S5300 Owner Manual - Page 46
Controlling Zone 2 with the Remote, Controller, Adjusting the Volume for Zone 2, Muting Zones
View all Onkyo HT-S5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Controlling Zone 2 with the Remote Controller ON/STANDBY ZONE2 INPUT SELECTOR MUTING VOLR/X 1 Press ZONE2, and then press ON/STANDBY. Zone 2 turns on, the ZONE 2 indicator lights. 2 To select an input source for Zone 2, press ZONE2, followed by an INPUT SELECTOR. To select AM or FM press the TUNER input selector repeatedly. Note • You cannot select different AM or FM radio stations for your main room and Zone 2. The same FM/AM radio station will be heard in each room. 3 To turn off Zone 2, press ZONE2 followed by ON/ STANDBY. Note • To control Zone 2, you must press the remote controller's ZONE2 first. Adjusting the Volume for Zone 2 ■ Operating with the remote controller 1 Press ZONE2. 2 Use VOL R/X to adjust the volume. ■ Operating on the AV receiver 1 Press ZONE 2 (the ZONE 2 indicator and Zone 2 selector on the display flashes). 2 Use -/+ within 8 seconds to adjust the volume. If your Zone 2 speakers are connected to a receiver or integrated amp in Zone 2, use its volume control to adjust the volume. Muting Zones ■ Operating with the remote controller Press ZONE2 followed by MUTING. Tip • To unmute, • Press ZONE2 followed by MUTING again. Note • Only analog input sources are output by the ZONE 2 LINE OUT and FRONT HIGH OR ZONE2 L/R speaker terminals. Digital input sources are not output. If no sound is heard when an input source is selected, check if it's connected to an analog input. • While Powered Zone 2 is being used, listening modes that require surround back and front high speakers (6.1/7.1), such as Dolby Pro Logic IIz Height, Dolby Digital EX, and DTS-ES are unavailable. • While Zone 2 is on, V functions will not work. • You cannot select different AM or FM radio stations for your main room and Zone 2. The same FM/AM radio station will be heard in each room. For example, if you have an FM station for the main room, that station will also be used in Zone 2. • Zones can also be unmuted by adjusting the volume. En 46