Onkyo HT-S5300 Owner Manual - Page 9

Speaker Package Subwoofer (SKW-580) For detailed information, see the pages in parentheses. ■ Front B ■ Rear (North American models) B STANDBY/ON indicator Red: Subwoofer in standby mode Blue: Subwoofer on With the Auto Standby function, the SKW-580 automatically turns on when an input signal is detected in Standby mode. When there's no input signal for a while, the SKW-580 automatically enters Standby mode. C OUTPUT LEVEL control (➔ 21, 22) This control is used to adjust the volume of the subwoofer. D LINE INPUT (➔ 13) This RCA input should be connected to the subwoofer pre out on the AV receiver with supplied RCA cable. To AC outlet C D (Asian models) To AC outlet C D Note • The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on the AV receiver (➔ 36). Front, Center, Surround and Surround Back Speakers (SKF-580, SKC-580, SKR-580, SKB-580) SKF-580 SKR-580/SKB-580 B B C C Front Rear B Keyhole slots These keyhole slots can be used to wall-mount the speaker. See "Wall Mounting" for mounting instructions (➔ 14). C Speaker terminals These push terminals are for connecting the speaker to the HT-R580 with the supplied speaker cables. The supplied speaker cables are color-coded for easy identification. Simply connect each cable to the samecolored positive speaker terminal. Caution • The front grilles are not designed to be removed so do not attempt to remove them forcibly, as this will damage them. Front Rear SKC-580 BC Front Rear En 9