Onkyo HT-S9300THX Owner Manual - Page 38

Component Video Input If you connect a video component to a component video input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to COMPONENT VIDEO IN 2, you must assign "IN2" to the "BD/DVD" input selector. Here are the default assignments. Input selector BD/DVD VCR/DVR CBL/SAT GAME AUX TUNER TV/CD PORT Default assignment IN1 ----IN2 Fixed) --------- ■ BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD, PORT ` IN1, IN2: Select a corresponding component video input that the video component has been connected Select if you are using HDMI output, not component video output, to output composite video and component video sources. Note • If you connect a component (such as UP-A1 Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector. Digital Audio Input If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to the OPTICAL IN 1, you must assign "OPT1" to the "TV/CD" input selector. Here are the default assignments. Input selector BD/DVD VCR/DVR CBL/SAT GAME AUX TUNER TV/CD PORT Default assignment COAX1 ----COAX2 OPT1 Fixed) OPT2 ----- ■ BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD, PORT ` COAX1, COAX2, OPT1, OPT2: Select a corresponding digital audio input that the component has been connected Select if the component is connected to an analog audio input. Note • When an HDMI IN is assigned to an input selector in "HDMI Input" (➔ 37), the same HDMI IN will be set as a priority in this assignment. In this case, if you want to use the coaxial or optical audio input, make the selection in the Audio Selector in the Audio menu. • Available sampling rate for PCM signals from a digital input (optical and coaxial) is 32/44.1/48/88.2/96 kHz/16, 20, 24 bit. • If you connect a component (such as UP-A1 Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector. En 38