Onkyo HT-S9300THX Owner Manual - Page 39
Speaker Setup, Speaker Settings, Speaker Configuration
View all Onkyo HT-S9300THX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Speaker Setup Speaker Configuration Main menu Speaker Setup Some of the settings in this section are set automatically by Audyssey 2EQ® Room Correction and Speaker Setup function (➔ 23). Here you can check the settings made by Audyssey 2EQ Room Correction and Speaker Setup function, or set them manually, which is useful if you change one of the connected speakers after using Audyssey 2EQ Room Correction and Speaker Setup function. Note These settings are disabled when: • a pair of headphones is connected, or • the "Audio TV Out" setting is set to "On" (➔ 49) and an input selector other than HDMI is selected. Speaker Settings If you change these settings, you must run Audyssey 2EQ Room Correction and Speaker Setup again (➔ 23). ■ Speaker Terminal Assign Front High/Zone2 With this setting, you can specify the speakers connected to FRONT HIGH OR ZONE 2 SPEAKERS terminals. `Front High: Front high speakers can be used. ` Zone2: Zone 2 speakers can be used. (Powered Zone 2 enabled). SurrBack/Front High With this setting, you can specify the speakers connected to SURR BACK OR FRONT HIGH SPEAKERS terminals. `Surr Back: Surround back speakers can be used. `Front High: Front high speakers can be used. Note • If "Front High" is selected in the "Front High/Zone2" setting, you cannot select "Front High" here. Speaker configuration settings only need to be changed if you are not using all of the speakers in this package. ■ Subwoofer, Center, Surround ` Yes: Select if a subwoofer/speaker(s) is connected. ` No: Select if no subwoofer/speaker is connected. ■ Front High*1*2*3 ` Yes: Select if a speaker(s) is connected. ` No: Select if no speaker is connected. ■ Surr Back*1*2*4 ` Yes: Select if a speaker(s) is connected. ` No: Select if no speaker is connected. Note *1 If the "Surround" setting is set to "No", this setting cannot be selected. *2 If Powered Zone 2 is being used (➔ 54), this setting cannot be selected. *3 If you have selected other than "Front High" in the "Front High/Zone2" or "SurrBack/Front High" setting, this setting cannot be selected. *4 If you have selected other than "Surr Back" in the "SurrBack/Front High" setting, this setting cannot be selected. ■ Surr Back Ch ` 1ch: Select if only one surround back speaker L is connected. ` 2ch: Select if two (left and right) surround back speakers are connected. Note • If the "Surr Back" setting is set to "No" (➔ 39), this setting cannot be selected. En 39