Onkyo HT-SP904 Owner Manual - Page 58
Crossover Frequency, Double Bass, Use the Down
![]() |
View all Onkyo HT-SP904 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Advanced Setup-Continued Crossover Frequency This setting is set automatically by the Automatic Speaker Setup function (see page 37). This setting only applies to the speakers that you specified as Small in the "Speaker Configuration" on page 57. To get the best bass performance from your speaker system, you need to set the crossover frequency according to the size and frequency response of your speakers 7 Use the Down [ ] button to select "Crossover," and then use the Left and Right [ ]/[ ] but- tons to select a crossover fre- quency. Use the diameter of the smallest speaker in your system when choosing the crossover frequency. Speaker cone diameter Crossover frequency Over 8 in. (20 cm) 40/50/60Hz* 6-1/2 to 8 in. (16-20 cm) 80Hz 5-1/4 to 6-1/2 in. (13-16 cm) 100Hz (default) 3-1/2 to 5-1/4 in. (9-13 cm) 120Hz Under 3-1/2 in. (9 cm) 150/200Hz* *Choose the setting suitable for the speaker. Continue with step 8 of the "Double Bass" setting. Notes: • For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly. • Choose a higher crossover frequency if you want more sound from your subwoofer. • These settings cannot be changed while headphones are connected, or the multichannel DVD input is being used. Double Bass This setting is not set automatically by the Automatic Speaker Setup function (see page 37). With the Double Bass function, you can boost bass output by feeding bass sounds from the front left and right channels to the subwoofer. This function can be set only if the Subwoofer setting (step 3) is set to Yes, and the Front setting (step 4) is set to Large in the Speaker Configuration on page 57. 8 Use the Down [ ] button to select "Double Bass," and then use the Left and Right [ ]/[ ] buttons to select: On: Double Bass function on. Bass from the front left and right channels is also fed to the subwoofer (default). Off: Double Bass function off. 9 Press the [SETUP] button. Setup closes. SETUP Note: • These settings cannot be changed while headphones are connected, or the multichannel DVD input is being used. 58
![](/manual_guide/products/onkyo-htsp904-owner-manual-12fb1fd/58.png)