Onkyo TX-DS898 Owner Manual - Page 58
Controlling an Onkyo MD recorder, SAT, CABLE, VCR, and TV MODE buttons
![]() |
View all Onkyo TX-DS898 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Using remote controller ON STDBY MD MODE VOL MUTING MD operation buttons Numeric keys ENTER Controlling an Onkyo MD recorder The connector of the Onkyo MD recorder must be connected to the TX-DS898 (see page 14). 1. Press the MD MODE button. The MD MODE button lights green. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo MD recorder. Operation buttons: ON: Turns on and off the MD player (same as STDBY button on the remote controller). : Track down : Track up : Play : Stop : Fast reverse : Fast forward R (Rec): Record : Pause : Eject the disc 1 to 9, 0, --/---: Numeric keys ENTER: Enters the settings You may also use the following buttons: VOL : Adjusts the volume at the TX-DS898 MUTING: Activates the muting function at the TX-DS898 CABLE SAT VCR TV VOL MUTING SAT, CABLE, VCR, and TV MODE buttons No preset codes are programmed into the SAT, CABLE, VCR, and TV MODE buttons. You can use these buttons to program the remote controller signals of other devices. There are two methods. One method is selecting the name of a different brand from the table, entering the setting number listed, and calling up the pre-programming code (see page 59). The other method is learning the commands from the other brand's remote control directly into this remote controller (see page 63). When in the SAT, CABLE and VCR mode, you may use the following buttons: VOL : Adjusts the volume at the TX-DS898 MUTING: Activates the muting function at the TX-DS898 58
![](/manual_guide/products/onkyo-txds898-owner-manual-5868de0/58.png)