Onkyo TX-NR1000 Owner Manual - Page 14

Index Parts and Facilities-Continued Rear Panel * A B C DIGITAL IN OPTICAL D DIGITAL IN COAXIAL E FR MULTI F - CH FL IN 1 R 1 1 PH 2 2 "Net -Tune" is a trademark of 3 3 Onkyo Corporation. 4 4 SUB C SR SBR SL R 1 SBL 2 ETHERNET 5 5 (Net -Tune) 6 6 FR FL 3 SUB C 1 1 1 SR SL 2 2 PRE OUT A FRONT SURR SURR BACK L A SURR R 2 OUT SBR SURR BACK R (ASSIGNABLE) SBL 3 R MULTI - CH IN 2 FRONT R AUDIO IN G L R 4 5 GND L 6 7 8 9 4 5 L OUT R CENTER L L R B H S VIDEO IN 1 VIDEO IN I IN 1 COMPONENT VIDEO IN 2 Y J COMPONENT VIDEO IN 4 Y K ANTENNA 2 PB 3 PR OUT 1 IN 3 4 Y 5 PB 6 PR 1 3 2 4 OUT S VIDEO VIDEO OUT VIDEO S VIDEO FRONT L SURR BACK L (ASSIGNABLE) (SINGLE) PB FM 75 PR OUT 2 Y AM PB PR SURR L L HDMI IN 1 RS232 REMOTE CONTROL IN 2 B 100mA MAX. D 100mA MAX. 12V TRIGGER OUT A 200mA MAX. C 100mA MAX. E 100mA MAX. MAIN ZONE 2 OUT ZONE 3 IN OUT IR SPEAKERS A AC OUTLET AC 120V 60Hz SWITCHED 120W 1A MAX. SPEAKERS B AC INLET CENTER SUB WOOFER SUB WOOFER PRE OUT B FRONT R (BTL) FRONT L (BTL) UDC / UDT MODEL NO. TX-NR1000 *This terminal is provided for future service enhancement and is not used currently. Never plug the cable connector for other terminals into this terminal. 1 ( ) i.LINK S400 (AUDIO) terminals Some of the Asian models are not equipped with the i.LINK(AUDIO) terminals. These connectors are for connecting to the i.LINK (AUDIO)-ready device using a 4-pin (S400) i.LINK (AUDIO) cable. The TX-NR1000/TX-NR5000E 7 VIDEO/S VIDEO IN/OUT These connectors are for connecting to the video input and output jacks on video components. Six input and 4 output jacks are available for each of VIDEO and S VIDEO connection. 8 COMPONENT VIDEO IN/OUT complies with the standards on audio only These connectors are for connecting to the component transimissions. video outputs/inputs of video components that have them. 2 ETHERNET (Net-Tune) This connector is for connecting to an Ethernet network. 3 DIGITAL OPTICAL IN/OUT The input/output terminals for digital sound signal. The sound quality equals the signal passed through the COAXIAL terminals. 4 DIGITAL COAXIAL IN/OUT The input/output terminals for digital sound signal. The sound quality equals the signal passed through the OPTICAL terminals. 5 MULTI-CH IN 1/2 This connector is for connecting components with a multichannel output. Two sets of multichannel input terminals are available on the TX-NR1000/TX-NR5000E. 6 AUDIO IN/OUT These connectors are for connecting to the audio input and output jacks on audio/video components. To connect a turntable, connect to the PH jacks. In addition to the PH jacks, the TX-NR1000/ TX-NR5000E offers nine input and five output jacks. European and Asian models are equipped with three inputs and one output for the RCA-type COMPONENT connection and one input and output for the BNC-type COMPONENT connection. For other than European and Asian models, there are four inputs and two outputs for the RCA-type COMPONENT connection. Check the type of terminals or jacks on the device to connect before making connections. 9 ANTENNA (FM/AM) These jacks are for connecting the FM indoor antenna and the AM loop antenna that are supplied with the TX-NR1000/TX-NR5000E. 0 HDMI IN/OUT This interface can transfer digital audio and video signals simultaneously. The terminal can be connected to the HDMI terminal on the components such as DVD player, set top box (B tuner), projector, and digital TV. A REMOTE CONTROL This jack is for connecting other Onkyo components equipped with the same terminal. The audio connection cables must also be connected. 14