Onkyo TX-NR545 Basics Guide - Page 63
Speaker
View all Onkyo TX-NR545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
2. Speaker Allows you to change the speaker configuration such as presence or not of subwoofer, crossover frequency, and so on. Settings are automatically configured if you use the Automatic Speaker Setup. This setting cannot be selected if headphones are connected or audio is output from the speakers of the TV. Configuration You can change the number of speaker channels connected, the type of front speaker connection, the height speaker type, and other speaker settings. Setting Item Default Value Speaker Channels 7.1 ch Subwoofer Yes Height Speaker Front High Bi-Amp No Setting Details Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", or "5.1.2 ch" to suit the number of speaker channels connected. Set whether a subwoofer is connected or not. "Yes": When subwoofer is connected "No": When subwoofer is not connected Set the speaker type if height speakers are connected to the BACK or HEIGHT terminals. Select "Front High", "Top Front", "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Front)", or "Dolby Speaker (Surr)" according to the connected speaker type and location. ●● If an item cannot be selected even though connection is correct, check that the settings in "Speaker Channels" matches the number of connected channels. Set whether your front speaker connection is biamp. "No": When front speakers are connected in a normal manner "Yes": When front speakers are bi-amp connected ●● If an item cannot be selected even though connection is correct, check that the settings in "Speaker Channels" matches the number of connected channels. Setting Item Powered Zone 2 Advanced Settings (Setup Menu) Default Value No Setting Details Set the connection of speakers to Zone 2 speaker terminals. "Yes": When speakers are connected to ZONE2 speaker terminals "No": When speakers are not connected to ZONE2 speaker terminals ●● This item will be set to "No" when "Bi-Amp" is set to "Yes". Crossover Allows you to change speaker configurations, such as crossover frequency. Settings are automatically configured if you use the Automatic Speaker Setup. Audio will not be output while you are making this setting. Setting Item Front Center Default Value 100 Hz 100 Hz Setting Details Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. ●● If "Configuration" - "Subwoofer" is set to "No", "Front" will be fixed to "Full Band" and the low pitched range of the other channels will be output from the front speakers. Refer to the instruction manual of your speakers to make the setting. Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. ●● "Full Band" can be selected only when "Front" is set to "Full Band". ●● If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels. En-31