Onkyo TX-NR545 User Manual - Page 4

1 2 3 4 56 7 8 9 F 1 23 4 5 67 (Taiwanese models) G H IJ Rear Panel 1 RI REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and synchronized with this unit. 2 TUNER AM/FM (75Ω) terminal: The supplied antennas are connected. 3 USB port: A USB storage device is connected so that music files stored in it can be played. USB devices can be supplied with power when connected with a USB cable. 4 COMPONENT VIDEO IN jack: Component video input jack 5 ETHERNET port: Used for LAN connection 6 COMPOSITE VIDEO IN jacks: Analog video signals are input. 7 HDMI IN/OUT jacks: Digital video signals and audio signals are transmitted between the unit and the connected devices. 8 Wireless antenna: Used for Wi- 90° Fi connection or when using a 180° 90° Bluetooth-enabled device. Adjust 180° their angles according to the connection status. 9 SPEAKERS terminals: Speakers are connected. To use the Multi-zone function, connect the speakers in the separate room to the ZONE2 speaker terminals. F Power cord (North American, European, Australian and Asian models) AC INLET (Taiwanese models): The supplied power cord is connected. G DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio signals are input. H COMPOSITE AUDIO IN jacks: Analog audio signals are input. I LINE OUT ZONE 2 jack: Audio output jack connected to the pre-main amplifier for multi-zone playback in a separate room. J PRE OUT SUBWOOFER jack: A subwoofer with built-in amplifier is connected. 9 8 Display 1 Lights in the following conditions. "Z2": Zone 2 output is on. / "HDMI": HDMI signals are input and HDMI input selector is selected. / "ARC": Audio signals are input from ARC compatible TV and TV input selector is selected. / "3D": Input signals are 3D. / "USB" (): "NET" input is selected and USB storage device is connected. / "NET" (): "NET" input is selected and the unit is connected to the network. / "DIGITAL": Digital signals are input and the digital input selector is selected. / Cursor indicators: NET or USB is controlled. ¼¼"USB" and "NET" will flash if the connection is not correct. 2 Stays lit when headphones are connected. 3 Lights when NET or USB is controlled. 4 Lights according to the type of input digital signals and the listening mode. 5 Stays lit when Music Optimizer is enabled. 6 Lights in the following conditions. "AUTO": Tuning mode is auto. / "TUNED": Receiving AM/FM radio.  flashes while tuning is automatically performed. / "FM STEREO": Receiving FM stereo. / "RDS" (European, Australian and Asian models): Receiving RDS broadcasting. 7 "MUTING": Flashes when muting is on. 8 Lights in the following conditions. "SLEEP": Sleep timer has been set. / "ASb" (Auto Standby): Auto Standby is on. / "ch": Channel is being set. / "Hz": Crossover frequencies are being set. / "m/ft": Speaker distances are being set. / "dB": Speaker volume is being set. 9 Displays various information of the input signals. Pressing DISPLAY displays the type of input digital signals and the listening mode. En-4