Onkyo TX-NR555 User Manual - Page 10
in case of,
View all Onkyo TX-NR555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
> Before start > Hookup > Setup > Playback > Part Names 1/2˝ (12 mm) 1 > Advanced Manual Troubleshooting | Appendix in case of: Page 8 Connect front speakers compatible with Bi-Amping connection to the FRONT jacks and the SURROUND BACK or HEIGHT jacks. Make sure you remove the jumper bar fitted between the woofer jacks and tweeter jacks of the front speakers. In case of Bi-Amping connection, refer to the instruction manual of your speakers. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER jacks. Setup 0 Bi-Amping connection requires you to change some settings. Select "Yes" in "Bi-Amp" in "1. AccuEQ Room Calibration" (P18) in the Initial Setup. For highfrequency For lowfrequency 2 Make sure the exposed wires of the speakers do not stick out of the speaker terminals when connecting. If the exposed wires of the speakers touch the rear panel or the + and - wires touch each other, the protection circuit will be activated. 1 Speaker cable, 2 Subwoofer cable 10