Onkyo TX-SR308 Owner Manual - Page 42

If you want to control an Onkyo component by pointing the remote controller directly at it, use the following remote control codes: ` 32900: Onkyo Blu-ray Disc player ` 32901: Onkyo HD-DVD player ` 70868: Onkyo MD recorder ` 71323: Onkyo CD recorder ` 82990: Onkyo Universal Port Option Dock Note • If you connect a cassette tape deck to the TV/CD IN jack, or connect an RI Dock to the TV/CD IN or VCR/DVR IN or GAME IN jacks, for V to work properly, you must set the Input Display accordingly (➔ 20). Controlling Other Components By pressing REMOTE MODE that's been programmed with the remote control code for your component, you can control Onkyo component as below. For details on entering a remote control code for a different component (➔ 41). Controlling a Blu-ray Disc/DVD Player, HD DVD Player or DVD Recorder BD/DVD is preprogrammed with the remote control code for controlling a component that supports the Q. The component must be able to receive remote control commands via Q and be connected to the AV receiver via HDMI. Resetting REMOTE MODE Buttons You can reset a REMOTE MODE to its default remote control code. 1 While holding down REMOTE MODE that you want to reset, press and hold down AUDIO until the remote indicator lights (about 3 seconds). 2 Within 30 seconds, press REMOTE MODE again. The remote indicator flashes twice, indicating that the button has been reset. Each of REMOTE MODE is preprogrammed with a remote control code. When a button is reset, its preprogrammed code is restored. Resetting the Remote Controller You can reset the remote controller to its default settings. 1 While holding down RECEIVER, press and hold down AUDIO until the remote indicator lights (about 3 seconds). 2 Within 30 seconds, press RECEIVER again. The remote indicator flashes twice, indicating that the remote controller has been reset. En 42