Onkyo TX SR507 Owner Manual - Page 41
HDMI Input Setup - hdmi fix
UPC - 751398008658
View all Onkyo TX SR507 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
First Time Setup-Continued HDMI Input Setup 4 If you connect a video component to an HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN1, you must assign HDMI IN1 to the DVD/BD input selector. Input selector DVD/BD VCR/DVR CBL/SAT AUX TV/TAPE TUNER CD PORT Default assignment HDMI1 HDMI2 HDMI3 Fixed) --------- 1 Press the [RECEIVER] button, 5 followed by the [SETUP] button. Use the Up and Down [R]/[X] buttons to select an input selector, and use the Left and Right [F]/[S] buttons to select: HDMI1: Select if the video component is connected to HDMI IN 1. HDMI2: Select if the video component is connected to HDMI IN 2. HDMI3: Select if the video component is connected to HDMI IN 3. HDMI4: Select if the video component is connected to HDMI IN 4 Select if you're not using the HDMI OUT. Press the [SETUP] button. Setup closes. Notes: • Each HDMI IN cannot be assigned to more than one input selector. 2 Use the Up and Down [R]/[X] buttons to select "1.Input • When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input Assign", and then press selector is automatically set to the same HDMI IN. [ENTER]. See "Digital Input Setup" on page 43. • The TUNER input selector cannot be assigned and is fixed at the option. • If you connect an input component (such as UP-A1 series Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector. • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, 3 Use the Up and Down [R]/[X] and [ENTER] button. buttons to select "1-1.HDMI", and then press [ENTER]. 41