Onkyo TX SR507 Owner Manual - Page 75
Miscellaneous (Volume) Setup, Volume Setup
UPC - 751398008658
View all Onkyo TX SR507 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Advanced Setup-Continued Miscellaneous (Volume) Setup This section explains the items on the "Miscellaneous" menu. 1 Press the [RECEIVER] button followed by the [SETUP] button. 2 Use the Up and Down [R]/[X] buttons to select "6. Miscellaneous", and then press [ENTER]. 3 Use the Up and Down [R]/[X] buttons to select an item, and then press [ENTER]. 4 Use the Up and Down [R]/[X] buttons to select an item, and use the Left and Right [F]/[S] buttons to change it. The items are explained below. 5 When you've finished, press the [SETUP] button. Setup closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. Volume Setup ■ MaxVolume With this setting, you can limit the maximum volume. The Maximum Volume range is "Off", 79 to 30. ■ POnVol With this preference, you can specify the volume setting to be used each time the AV receiver is turned on. The range is "Last", "Min", 1 to 79 or "Max". To use the same volume level that was used when the AV receiver was turned off, select "Last". The "POnVol" cannot be set higher than the "Max Volume" setting. ■ HP Level With this preference, you can specify the headphone volume relative to the main volume. This is useful if there's a volume difference between your speakers and your headphones. The headphones level can be set from -12 dB to +12 dB. 75