Onkyo TX SR507 Owner Manual - Page 42
Component Video Input Setup - ipod dock
UPC - 751398008658
View all Onkyo TX SR507 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
First Time Setup-Continued Component Video Input Setup If you connect a video component to a COMPONENT VIDEO IN, you must assign that input to an input selector. For example, if you connect your DVD player to COMPONENT VIDEO IN 2, you must assign COMPONENT VIDEO IN 2 to the DVD/BD input selector. Input selector DVD/BD VCR/DVR CBL/SAT AUX TV/TAPE TUNER CD PORT Default assignment IN1 ----IN2 Fixed) --------- 1 Press the [RECEIVER] button, followed by the [SETUP] button. 4 Use the Up and Down [R]/[X] buttons to select an input selector, and use the Left and Right [F]/[S] buttons to select: IN1: Select if the video component is connected to COMPONENT VIDEO IN 1. IN2: Select if the video component is connected to COMPONENT VIDEO IN 2. - - - - -: Select if you're not using the COMPONENT VIDEO OUT. 5 Press the [SETUP] button. Setup closes. Notes: • If you connect an input component (such as UP-A1 series Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector. • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 2 Use the Up and Down [R]/[X] buttons to select "1.Input Assign", and then press [ENTER]. 3 Use the Up and Down [R]/[X] buttons to select "1-2.Component", and then press [ENTER]. 42