Onkyo TX SR507 Owner Manual - Page 67
Surround, Small, Large, SurrBack, Crossover Crossover Frequency, Notes, DoubleBass - best settings
![]() |
UPC - 751398008658
View all Onkyo TX SR507 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Advanced Setup-Continued Surround*2 Small: Select if the surround speakers are small (default). Large: Select if the surround speakers are large. None: Select if no surround speakers are connected. SurrBack*3*4 Small: Select if the surround back speakers are small. Large: Select if the surround back speakers are large. None: Select if no surround back speakers are connected (default). SurrBack ch*5 2ch: Select if two (left and right) surround back speakers are connected. 1ch: Select if only one surround back L speaker is connected. *1 If the "Subwoofer" setting is set to "No", this setting is fixed at "Large" and does not appear. *2 If the "Front" setting is set to "Small", the "Large" option cannot be selected. *3 If the "Surround" setting is set to "None", or Powered Zone 2 is being used, this setting does not appear. *4 If the "Surround" setting is set to "Small", the Large option cannot be selected. *5 If the "Surround" or "SurrBack" settings are set to "None", this setting does not appear. Crossover (Crossover Frequency) This setting is set automatically by the Audyssey 2EQ™ Room Correction and Speaker Setup function (see page 37). This setting only applies to the speakers that you specified as "Small" in the "2-2. Sp Config (Speaker Configuration) (TX-SR507)" on page 66. To get the best bass performance from your speaker system, you need to set the crossover frequency according to the size and frequency response of your speakers. Use the diameter of the smallest speaker in your system when choosing the crossover frequency. Speaker cone diameter Crossover frequency Over 8 in. (20 cm) 40/50/60Hz* 6-1/2 to 8 in. (16-20 cm) 80Hz 5-1/4 to 6-1/2 in. (13-16 cm) 100Hz (default) 3-1/2 to 5-1/4 in. (9-13 cm) 120Hz Under 3-1/2 in. (9 cm) 150 /200Hz* * Choose the setting suitable for the speaker. Notes: • For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly. • Choose a higher crossover frequency if you want more sound from your subwoofer. DoubleBass This setting is not set automatically by the Audyssey 2EQ Room Correction and Speaker Setup function (see page 37). With the Double Bass function, you can boost bass output by feeding bass sounds from the front left, right, and center to the subwoofer. This function can be set only if the "Subwoofer" setting is set to "Yes", and the "Front" setting is set to "Large" in the "2-2. Sp Config (Speaker Configuration) (TX-SR507)" on page 66. On: Double Bass function on. Bass from the front left and right channels is also fed to the subwoofer (default). Off: Double Bass function off. 67
![](/manual_guide/products/onkyo-tx-sr507-owner-manual-6cb89e8/67.png)