Onkyo TX-SR508 Owner Manual - Page 48

Controlling Zone 2 with the Remote Controller ON/STANDBY ZONE2 INPUT SELECTOR MUTING VOLR/X 1 Press ZONE2, and then press ON/STANDBY. Zone 2 turns on, the ZONE 2 indicator lights. 2 To select an input source for Zone 2, press ZONE2, followed by an INPUT SELECTOR. To select AM or FM press the TUNER input selector repeatedly. (North American models) You can also select SIRIUS. Note • You cannot select different AM or FM radio stations for your main room and Zone 2. The same FM/AM radio station will be heard in each room. 3 To turn off Zone 2, press ZONE2 followed by ON/ STANDBY. Note • To control Zone 2, you must press the remote controller's ZONE2 first. Adjusting the Volume for Zone 2 ■ Operating with the remote controller 1 Press ZONE2 2 Use VOL R/X ■ Operating on the AV receiver 1 Press ZONE 2 (the ZONE 2 indicator and Zone 2 selector on the display flashes) 2 Use -/+ within 8 seconds If your Zone 2 speakers are connected to a receiver or integrated amp in Zone 2, use its volume control to adjust the volume. Muting Zones ■ Operating with the remote controller 1 Press ZONE2 2 Press MUTING To unmute a zone 1 Press ZONE2 2 Press MUTING again Note • Only analog input sources are output by the ZONE 2 LINE OUT and FRONT HIGH OR ZONE2 L/R speaker terminals. Digital input sources are not output. If no sound is heard when an input source is selected, check if it's connected to an analog input. • While Powered Zone 2 is being used, listening modes that require surround back and front high speakers (6.1/7.1), such as Dolby Pro Logic IIz Height, Dolby Digital EX, and DTS-ES are unavailable. • While Zone 2 is on, V functions will not work. • You cannot select different AM or FM radio stations for your main room and Zone 2. The same FM/AM radio station will be heard in each room. For example, if you have an FM station for the main room, that station will also be used in Zone 2. • Zones can also be unmuted by adjusting the volume. En 48