Optoma EH505 User Guide - Page 95
Command, Description, Remark Parameter, PJLink™ Class
View all Optoma EH505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Appendices Command INPT? Description Inquiry about input switching AVMT AVMT? ERST? v This projector is fully compliant to the specifications of JBMIA PJLink™ Class 1. It supports all the commands defined by PJLink™ Class 1, and the compliance has been verified with the PJLink™ standard specifications Version 1.0. LAMP? INST? NAME? INF1? INF2? Mute control Inquiry about the mute state Inquiry about the error state Inquiry about the lamp state Inquiry about the available inputs Inquiry about the projector name Inquiry about the manufacturer name Inquiry about the model name Remark (Parameter) 12 = VGA2 13 = Component 14 = BNC 21 = VIDEO 22 = S-VIDEO 31 = HDMI 1 32 = HDMI 2 30 = Video and audio mute disable 31 = Video and audio mute enable 1st byte: Fan error, 0 or 2 2nd byte: Lamp error, 0 to 2 3rd byte: Temperature error, 0 or 2 4th byte: Cover open error, 0 or 2 5th byte: Filter error, 0 or 2 6th byte: Other error, 0 or 2 0 to 2 mean as follows: 0 = No error detected, 1 = Warning, 2 = Error 1st value (1 to 5 digits): Cumulative LAMP operating time (This item shows a lamp operating time (hour) calculated based on that LAMP MODE is LOW.) 2nd value: 0 = Lamp off, 1 = Lamp on The following value is returned. "11 12 21 22 31 32" The projector name set on the NETWORK menu or the ProjectorView Setup window is returned "Optoma" is returned. "EH7700" is returned. 95 English