Optoma EH615T EH615T User Manual - Page 87

Setting and resetting the custom code

Get Optoma EH615T PDF manuals and user guides View all Optoma EH615T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

ADDITIONAL INFORMATION Key 0/3D Custom code Byte 1 Byte 2 32 CD Data code Byte 3 89 Printing-key definition ‡‡ 0/3D ‡‡ Description Press to choose 3D source. Use as numeric keypad number "0". Note: ‡‡ If the projector supports Dynamic Eco / Image Care features and AV Mute is pressed, the power consumption of the lamp becomes 30%. Setting and resetting the custom code To set the custom code, do the following: 1. Press the ID key for more than 3 seconds. Meanwhile, the red LED will slowly flash. 2. Release the ID key and press two number keys within 10 seconds to switch the custom code. For example, press the ID key for more than 3 seconds. Then release the ID key and press the 0 key and the 1 key. As a result, the custom code becomes 3201. Note: If you press the two number keys after the 10 seconds time gap has passed then the custom code remains unchanged. To reset the custom code, press the ALL key for more than 3 seconds. Meanwhile, the red LED will flash quickly and the custom code is reset. For example, if the custom code was 3201 it becomes the default 32 CD. English 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
English
87
ADDITIONAL INFORMATION
Key
Custom code
Data
code
Printing-key
definition
Description
Byte 1
Byte 2
Byte 3
0/3D
32
CD
89
0/3D
±
Press to choose 3D source.
±
Use as numeric keypad number
“0”.
Note°
±
If the projector supports Dynamic Eco / Image Care features and AV Mute is pressed, the power
consumption of the lamp becomes 30%.
Setting and resetting the custom code
To set the custom code, do the following:
1.
Press the
ID
key for more than 3 seconds. Meanwhile, the red LED will slowly flash.
2.
Release the
ID
key and press two number keys within 10 seconds to switch the custom code.
For example, press the
ID
key for more than 3 seconds. Then release the
ID
key and press the
0
key
and the
1
key. As a result, the custom code becomes 3201.
Note°
If you press the two number keys after the 10 seconds time gap has passed then the custom
code remains unchanged.
To reset the custom code, press the
ALL
key for more than 3 seconds. Meanwhile, the red LED will flash quickly
and the custom code is reset. For example, if the custom code was 3201 it becomes the default 32 CD.