Optoma HD50 User's Manual - Page 48
Setup | HDMI Link Settings
View all Optoma HD50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
User Controls Setup | HDMI Link Settings Noottee • When Power Mode (Standby) is set to Active, DevicePJ will be active when the projector is in standby • Some HDMI Link functions may not operate, depending on the connected product's design and compliance with the HDMI CEC standard. HDMI Link Enable/Disable the HDMI Link function. The Inclusive TV, Power on Link, and Power off Link options will only available if the setting is set to On. Inclusive TV If the setting is set to "Yes", both TV and projector will be automatically turned off at the same time. To prevent both devices to be turned off at the same time, set the setting to "No". Power On Link CEC power on command. Mutual: Both projector and CEC device will be turned on simultaneously. PJDevice: The CEC device will be turned on only after the projector is switched on. DevicePJ: The projector will be switched on only after the CEC device is turned on. Power Off Link If the setting is set to "On", both HDMI Link and projector will be automatically turned off at the same time. Set to "Off", both HDMI Link and projector will be not automatically turned off at the same time. 48