Optoma UHD50 UHD50 User Manual - Page 31
D menu, Color Space HDMI input only
View all Optoma UHD50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
USING THE PROJECTOR Color Space (non-HDMI input only): Select an appropriate color matrix type from the following: AUTO, RGB, or YUV. Signal Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto, RGB(0-255), RGB(16-235), and YUV. Adjust the signal options. Automatic: Configure automatically the signal (the frequency and phase items are grayed out). If automatic is disabled, the frequency and phase items will appear for tuning and saving the settings. Frequency: Change the display data frequency to match the frequency of your computer's graphic card. Use this function only if the image appears to flicker vertically. Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. H. Position: Adjust the horizontal positioning of the image. V. Position: Adjust the vertical positioning of the image. Exit: Exit the "Signal" menu. Note: This menu is only available if the input source is RGB/Component. UltraDetail Adjust the edges of the projected image in order to provide more perceived details. Dynamic Black Use to automatically adjust the picture brightness to give optimum contrast performance. Brightness Mode Adjust the brightness mode settings. Bright: Choose "Bright" to increase the brightness. Reset Eco: Choose "Eco" to dim the projector lamp which will lower power consumption and extend the lamp life. Return the factory default settings for color settings. 3D menu 3D Mode Use this option to enable/disable the 3D mode function. 3D Sync Invert Use this option to enable/disable the 3D sync invert function. English 31