Optoma UHD50 UHD50 User Manual - Page 35

USING THE PROJECTOR Power Mode (Standby) Set the power mode setting. ‡‡ Active: Choose "Active" to return to normal standby. ‡‡ Eco: Choose "Eco." to save power dissipation further < 0.5W. Security menu Security Enable this function to prompt for a password before using the projector. ‡‡ Off: Choose "Off" to be able to switch on the projector without password verification. ‡‡ On: Choose "On" to use security verification when the turning on the projector. Security Timer Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this time has elapsed you will be requested to enter your password again. Change Password Use to set or modify the password that is prompted when turning the projector on. Test pattern menu Select the test pattern from green grid, magenta grid, white grid, white, or disable this function (off). Remote settings menu IR Function Set the IR function setting. ‡‡ On: Choose "On", the projector can be operated by the remote control from top and front IR receivers. ‡‡ Front: Choose "Front", the projector can be operated by the remote control from the front IR receiver. ‡‡ Back: Choose "Back", the projector can be operated by the remote control from the rear IR receiver. ‡‡ Off: Choose "Off", the projector can't be operated by the remote control. By selecting "Off", you will be able to use the Keypad keys. User1/ User2/ User3 Assign the default function for User1, User2, or User3 between Test Pattern, CMS, Color Temp, Gamma, Auto Source, Projection, Lamp Settings, Digital Zoom, MHL, Dynamic Range, or Dynamic Black. Projector ID menu ID definition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command. English 35