Optoma W501 User's Manual - Page 80

AMX Device Discovery commands

Get Optoma W501 PDF manuals and user guides View all Optoma W501 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

AMX Device Discovery commands UDP : 239.255.250.250 Port No. : 9131 Each UDP broadcast information as below are updated around 40 seconds Command Description Value Device-UUID MAC address(Hex value without ':' separator) 12 digits DeviceSDKClass The Duet DeviceSdk class name VideoProjector Device-Make Maker name MakerPXLW Device-Model Model name Projector Device's IP address LAN IP address is shown up if LAN IP Config-URL address is valid. http://xxx.xxx.xxx.xxx/index.html Wireless LAN IP address is shown up if Wireless LAN IP address is valid. The revision must follow a Revision major.minor.micro scheme. The revision is only increased if the 1.0.0 command protocol is modified. Attention 1. This AMX function is only to support AMX Device Discovery. 2. The broadcast information only send out through valid interface. 3. Both LAN and Wireless LAN interfaces could be supported at the same time. 4. If "Beacon Validator" was used. Please take care below information. EN-80

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
EN-80
AMX Device Discovery commands
UDP : 239.255.250.250
Port No. : 9131
Each UDP broadcast information as below are updated around 40 seconds
Attention
1.
This AMX function is only to support AMX Device Discovery.
2.
The broadcast information only send out through valid interface.
3.
Both LAN and Wireless LAN interfaces could be supported at the same
time.
4.
If "Beacon Validator" was used. Please take care below information.
Command
Description
Value
Device-UUID
MAC address(Hex value without ‘:’
separator)
12 digits
Device-
SDKClass
The Duet DeviceSdk class name
VideoProjector
Device-Make
Maker name
MakerPXLW
Device-Model
Model name
Projector
Config-URL
Device’s IP address
LAN IP address is shown up if LAN IP
address is valid.
Wireless LAN IP address is shown up if
Wireless LAN IP address is valid.
Revision
The revision must follow a
major.minor.micro scheme.
The revision is only increased if the
command protocol is modified.
1.0.0