Optoma ZU850 ZU850 User Manual - Page 34

Reset RGB Gain/Offset, Color Wheel Speed

Page 34 highlights

USING THE PROJECTOR Advanced menu DISPLAY OUTPUT SETUP OPTION White Peaking Gamma Color Temperature Color Space RGB Gain/Bias Color Wheel Speed Film Mode Extreme Black Dynamic Black Advanced 100 Graphic Cool Auto 2X On Off Off White Peaking (Video source only) Increase the brightness of whites that are near 100%. Gamma This allows you to set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma adjustment steps to optimize your image output. ‡‡ Video: for video or TV source. ‡‡ Film: for home theater. ‡‡ Blackboard: for emphasizing brightness. ‡‡ Graphic: for computer source or RGB source. ‡‡ DICOM: independent gamma setting of the display mode for DICOM SIM. ‡‡ Gamma 2.2: independent gamma setting of the display mode for Blending. Color Temperature Select a color temperature from Warm, Medium, Cool, or Cold. Color Space Select an appropriate color matrix type from RGB, REC709, REC601, RGB Video, or Auto. RGB Gain/Bias Configure the brightness (gain) and contrast (offset) of an image. ‡‡ Red Gain/Green Gain/Blue Gain/Red Offset/Green Offset/Blue Offset: Adjust the gain of the red, green, or blue channel of the image. Adjust the offset of the red, green, or blue channel of the image. It will affect the black and white. ‡‡ Reset RGB Gain/Offset: Reset the gain and offset adjustments to the factory defaults. Color Wheel Speed Adjust the wheel speed. ‡‡ 2X: provides quieter sound and longer life. ‡‡ 3X: provides better color performance. Film Mode Control film mode detection and determine whether the original source of the input video was film or video. Note: This function is available for interlaced video signals. 34 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

English
34
USING THE PROJECTOR
Advanced menu
White Peaking
Gamma
Color Temperature
Color Space
RGB Gain/Bias
Color Wheel Speed
Film Mode
Extreme Black
Dynamic Black
DISPLAY
OUTPUT
SETUP
OPTION
Advanced
100
Graphic
Cool
Auto
2X
On
Off
Off
White Peaking
(Video source only) Increase the brightness of whites that are near 100%.
Gamma
This allows you to set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma
adjustment steps to optimize your image output.
±
Video
: for video or TV source.
±
Film
: for home theater.
±
Blackboard
: for emphasizing brightness.
±
Graphic
: for computer source or RGB source.
±
DICOM
: independent gamma setting of the display mode for
DICOM SIM
.
±
Gamma 2.2
: independent gamma setting of the display mode for
Blending
.
Color Temperature
Select a color temperature from Warm, Medium, Cool, or Cold.
Color Space
S
elect an appropriate color matrix type from RGB, REC709, REC601, RGB Video, or Auto.
RGB Gain/Bias
Configure the brightness (gain) and contrast (offset) of an image.
±
Red Gain
/
Green Gain
/
Blue Gain
/
Red Offset
/
Green Offset
/
Blue Offset
: Adjust the gain of the red,
green, or blue channel of the image. Adjust the offset of the red, green, or blue channel of the image. It
will affect the black and white.
±
Reset RGB Gain/Offset
: Reset the gain and offset adjustments to the factory defaults.
Color Wheel Speed
Adjust the wheel speed.
±
2X
: provides quieter sound and longer life.
±
3X
: provides better color performance.
Film Mode
Control film mode detection and determine whether the original source of the input video was film or video.
Note:
This function is available for interlaced video signals.