Oregon Scientific SE102 User Manual - Page 12
Heart Rate Limits / Alert
View all Oregon Scientific SE102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
EN To use the tap on lens function: 1. Press MODE to navigate to the clock mode. 2. Press SET until you reach the tap on lens display and use + to select TOUCH ON. 3. Press and hold SET. 4. Press + to select 1 of the 6 modes and SET to confirm. appears when the tap on lens feature is activated and flashes when the preset display is shown. HEART RATE LIMITS / ALERT To set lower and upper heart rate limits / alert: 1. Press MODE to switch to heart rate mode. 2. Press and hold SET until the first setting flashes. 3. Press + to change the setting. Hold to speed through the options. 4. Press SET to confirm and move onto the next setting. 5. The setting sequence is: Target activity (Walk, Jog or Run), lower heart rate limit, upper heart rate limit, alert ON / OFF, start and stop time. NOTE You need to set the target activity for automatic calculation of the lower and upper heart rate limit. If you change the target activity level or age, your upper / lower heart rate will automatically be updated. 12 SE102-SE102L_EN_R3.indd 12 5/30/06 4:09:35 PM