Oregon Scientific WMR200 User Manual - Page 8

EN To select clock display mode: Press clock area repeatedly to toggle between: • Clock with seconds • Clock with weekday • Date with year • Data logger (please refer to Memory / Data logger section) PRESSURE To toggle barometer unit: 1. Press barometer area to toggle between Altitude / current barometer. 2. Press UNIT to select FEET / M or inHg / mmHg / mb / hPA. SET ALTITUDE Set the altitude to reflect distance from sea level at your position. 1. Press barometer area to display ALT. 2. Press SET. 3. Press UP / DWN to set the altitude in 10 m (33 ft) increments from -100 m (-328 ft) to 2500 m (8202 ft). 4. Press SET or touch panel area (except tool bar / forecast area) to confirm. RAINFALL To select rainfall display mode: Press rain area to toggle between: • Rain rate • Hourly Rainfall • Accumulated rainfall • Rainfall recorded in the past 24 hours Press UNIT to select mm / in. ACCUMULATED RAINFALL To display SINCE DATE: 1. Press rain area repeatedly until Accumulated Rainfall is displayed. (Clock area will display the start date / time of rainfall recording). To reset SINCE DATE: Press and hold MEM to set current time as start of accumulated rainfall records. UV The UV index levels are as follows: UV INDEX DANGER LEVEL 0-2 Low 3-5 Moderate 6-7 High 8-10 Very high 11 and above Extremely high ICON WEATHER FORECAST This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius (US- with a 75% accuracy). Sunny Clear night Partly cloudy Partly cloudy at night Cloudy 2. Press UNIT to select °C / °F. To auto-scan between sensors (Outdoor): 1. Press Outdoor Temperature / Humidity area. 2. Press and hold CH to display data for each sensor. AUTO SCANNING FUNCTION To activate the outdoor temperature and humidity auto-scan function: 1. Press and hold CH to activate auto-scan. The temperature and humidity display will scroll from indoor to ch1 through to ch10. 2. Press CH / MEM to stop the auto-scan. NOTE Channel 1 is used for the outdoor temperature and humidity sensor provided in this package. Additional temperature and humidity sensors can use other channels. To change channel: Press CH to change channel. TEMPERATURE AND HUMIDITY TRENDS The temperature and humidity trend icons are based on recent sensor readings. The trend lines are shown next to the temperature and humidity readings. The trend is shown as follows: RISING STEADY FALLING HEAT INDEX Press Indoor / Outdoor temperature felt: Temperature / Humidity area to display the actual TEMPERATURE RANGE WARNING MEANING 27°C to 32°C (80°F to 89°F) 32°C to 40°C (90°F to 104°F) 41°C to 54°C (105°F to 129°F) 54°C to 92°C (130°F to 151°F) Caution Possibility of heat exhaustion Extreme Caution Possibility of heat dehydration Danger Extreme danger Heat exhaustion likely Strong risk of dehydration / sun stroke NOTE Heat index is only calculated when temperature is 80° F / 27°C or above. WIND To select wind display mode: Press wind area • Gust • Average to toggle between: Press UNIT to select unit: knots / kph / mph / m/s. The wind level is shown by a series of icons: Lost sensor Light 0-8 mph (3-13 km/h) Moderate 9-25 mph (14-41 km/h) Strong 26-54 mph (42-87 km/h) Storm >55 mph (>88 km/h) MOON PHASE 1. Press clock area to activate. 2. Press SET repeatedly to display Year / Calendar date. 3. Press UP / DWN to view moon phase for specific dates. Rainy Snowy TEMPERATURE AND HUMIDITY To toggle temperature unit: 1. Press Indoor / Outdoor Temperature / Humidity area. 8 New Moon Waxing Crescent First quarter Full Moon Waning Gibbous Last quarter