Panasonic 52DL52 Operating Instructions - Page 58

I Operatingperipherael quipmentusingthe remotecontrol Programming The Illuminated Remote Control Using Access Codes The Universal Remote Control can be programmed to operate many manufacturers' components, using the component function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component. Determine the manufacturer of the component and look in the table for the code. 1 Confirm that the external component is plugged in and operating. 2 Turn the component off. 3 Press POWER and ACTION together, for at least 5 seconds. After 5 seconds, all the illuminated mode keys will begin to flash. Release the POWER and ACTION keys. 4_ _ The mode key will illuminate steadily, all others will go out. Press the mode key. ,[o0Io ®®® Enter the 3-digit component code using the Remote Control numeric keypad. © ®® Press the Remote Control _ the component will turn on. Default Modes For Remote Control to test the component. If the procedure is successfuL, TV DTV CABLE DBS VCR DVDICD AUX RCVR (Panasonic Only) DTV (Panasonic Only) CABLE (Preset) DBS (Preset) VCR (Preset) DVD and CD (Preset) Personal Video Recorders, Tape and VCR2 Audio Receiver (Preset) Panasonic TV Codes Panasonic DTV Codes Panasonic CABLE Codes Panasonic DBS Codes Panasonic VCR Codes Panasonic DVD Codes Panasonic Personal Video Recorders Code Panasonic RCVR Code Helpful Hints: Unsuccessful Code If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds,the programming will fail. 58