Panasonic AG-DVC7 Dv Camcorder - Page 15
USING THE VIEWFINDER/LCD MONITOR, Using the Viewfinder, Using the LCD Monitor - parts
UPC - 791871302330
View all Panasonic AG-DVC7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Using the Viewfinder/LCD Monitor Before Use $ Using the Viewfinder Before using the Viewfinder, adjust the field of view so that the displays inside the Viewfinder become clear and easy to read. 1 Pull out the Viewfinder and tilt it up. 2 Adjust the LCD Monitor angle according to the desired recording angle. 1 180° 2 90° OThe angular part of the Viewfinder can be turned upward by 80° and downward by 38°. ODo not pull on the Eyecup to extend the Viewfinder. 2 Adjust by sliding the Eyepiece Corrector Knob I. 1122::3300::4455 AAMM OOCCTT 1155 22000022 I 12:30:45 AM OCT 15 2002 $ Using the LCD Monitor With the LCD Monitor open, you can also record the picture while watching it. 1 Press the [PUSH OPEN] Button : and, at the same time, bring the LCD Monitor ; out about 90° in the direction of the arrow. ; : OThe Viewfinder goes off. OThe LCD Monitor can rotate a maximum of 180° 1 from the vertical position to the upward direction and a maximum of 90° 2 to the downward direction. Forcefully rotating the LCD Monitor beyond these ranges will damage the Camera Recorder. OWhen you open the LCD Monitor, be sure that the LCD Monitor and the Viewfinder cannot touch. Closing the LCD Monitor Push the LCD Monitor until it is securely locked. $ Adjusting Brightness and Color Level When [LCD/EVF SET] on the [DISPLAY SETUP] SubMenu is set to [YES], the following items are displayed. LCD/EVF SET LCD BRIGHTNESS LCD COLOR LEVEL EVF BRIGHTNESS PUSH MENU TO RETURN LCD Brightness [LCD BRIGHTNESS] It adjusts the brightness of the image on the LCD screen. LCD Color Level [LCD COLOR LEVEL] It adjusts the color saturation of the image on the LCD screen. Brightness of the Viewfinder [EVF BRIGHTNESS] It adjusts the brightness of the image in the Viewfinder. To Adjust Press the [PUSH] Dial and select the item to be adjusted, and then turn the [PUSH] Dial to raise or lower the number of vertical bars in the Bar Indication. OA larger number of vertical bars indicates stronger brightness or color saturation. Increasing the Brightness of the Entire LCD Monitor Set the [LCD MODE] on the [DISPLAY SETUP] SubMenu to [BRIGHT]. OThese adjustments do not affect the recorded images. OFor other notes concerning this item, see -49-. 15