Panasonic AG-DVC7 Dv Camcorder - Page 20

Camera Mode Recording When recording with the [AUTO/MANUAL/PROG.AE] Switch ? set to [AUTO], the Camera Recorder automatically adjust the focus and white balance. In some cases, they cannot be adjusted automatically and need to be adjusted manually. (-27-, -29-) AUTO ? MANUAL PROG. AE 1 Set the [OFF/ON] Switch b to [ON]. OThe [CAMERA] Lamp ` lights up. ` CAMERA VCR OFF ON b $ To Pause the Recording Press the Recording Start/Stop Button a (or R) again. The [PAUSE] Indication is displayed. PAUSE PAUSE OIf the Recording Pause Mode continues for more than 5 minutes, the power is turned off automatically for tape protection and power conservation. To resume recording from this condition, turn off, then turn on the power again. $ To Check the Recording By pressing the Recording Check Button [ ] D briefly in the Recording Pause Mode, you can play back the last few seconds of the recorded scene. 2 Press the Recording Start/Stop Button a (or Sub Recording Start/Stop Button R). ORecording starts. OAfter the [RECORD] is displayed, it changes to [REC]. R a REC RECORD $ Recording Lamp (Tally Lamp) The Recording Lamp 2 lights up during recording and alerts those being recorded that recording is in progress. D SEARCH OThe [CHK] Indication is displayed. After checking, the Camera Recorder resumes the Recording Pause Mode. $ To View the Recorded Scene while the Recording is Paused (Camera Search) The recorded scene can be viewed by keep pressing the [SEARCH -] Button D or [SEARCH +] Button G in the Recording Pause Mode. D SEARCH G SEARCH OWhen the [SEARCH -] Button is pressed, images are played back in the reverse direction. OWhen the [SEARCH +] Button is pressed, images are played back in the forward direction. 2 OThe Recording Lamp does not light up if the [REC LAMP] on the [OTHER FUNCTIONS] Sub-Menu is set to [OFF]. 20