Panasonic AG-DVX100A Digital Video Record - Page 15
AUDIO DUB button, VCR REC buttons, AUDIO MON/VAR buttons, ZOOM switch, SERVO - pictures
UPC - 791871302378
View all Panasonic AG-DVX100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Parts and their functions ` _\ ] ^ a b c [ZOOM switch This is used to select motor-driven zoom operations or manual zoom operations. SERVO: For motor-driven zoom operations (At this position, do not attempt to perform manual zoom operations or malfunctioning may result.) MANU: For manual zoom operations \START/STOP button (on the handle) When this button is pressed in the camera mode, shooting start or stop is selected. The camera mode and VCR mode are switched using the CAMERA/VCR button >. ]REC CHECK button When this button is pressed in the shooting pause mode, the picture and sound immediately before shooting was stopped are played back for several seconds, and the shooting pause mode is established at the original position on the tape. ^Zoom button When the ZOOM switch is at the SERVO position, motor-driven zoom operations are performed. When this button is pressed lightly, zoom operations are performed at a low speed; when it is pressed with force, they are performed at a high speed. _Zoom button (on the handle) `HANDLE ZOOM switch This switch is used to select one of the three speeds for the zoom operations conducted using the zoom button _ on the handle. The speed is set using the HANDLE ZOOM item on the setting menu SW MODE screen. (See page 43) [ ZOOM SERVO MANU aAUDIO DUB button When the pause status is established in the VCR mode and this button is pressed, the mode in which audio dubbing can be started is established. Press ";" of the OPERATION lever T to record the sound. To stop the recording, tilt the OPERATION lever in the "$" direction. The audio input used for audio dubbing is set using the A DUB INPUT item on the setting menu AV IN/OUT SETUP screen. (See page 47) OBefore proceeding with the audio dubbing, select "32K (12 bit)" as the AUDIO REC item setting on the setting menu RECORDING SETUP screen and then start shooting. (See page 45) bVCR REC buttons When these two buttons are pressed at the same time in the stop status of the VCR mode, the video signals from the connected component are recorded. When they are pressed at the same time in the playback pause status of the VCR mode, the recording standby status is established. Each time ";" of the OPERATION lever T is pressed, the status alternates between recording and recording standby. To stop recording, tilt the OPERATION lever in the "$" direction. OBefore proceeding to record, check that the video signals have been input. cAUDIO MON/VAR buttons These buttons are used to adjust the volume at which the sound is to be output from the internal speaker f or PHONES jack 6. The playback direction and playback speed are changed in the variable speed search mode. (See page 63) When these buttons are pressed in the pause status, the tape is played back frame by frame. 15