Panasonic AG-DVX100A Digital Video Record - Page 16
INPUT 2 switch MIC POWER +48 V - 16 9
UPC - 791871302378
View all Panasonic AG-DVX100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Parts and their functions f g h i km e jl d dOPEN button Press the OPEN button in the direction of the arrow to open the LCD monitor e. When the LCD monitor is opened, the image on the viewfinder switches to the LCD monitor. The image can be switched using the EVF MODE item on the setting menu DISPLAY SETUP screen. (See page 45) OPEN eLCD monitor fInternal speaker gRESET button If the camera recorder cannot be operated even though its power is on or some other form of trouble has occurred, use a pointed object to press the RESET button. This will reset the system microcomputer. Even after resetting has been initiated, the entered setting menu values and memory contents will not be erased. Refrain from pressing the RESET button when the camera recorder is operating properly. hSHUTTER button Press this button to change the shutter speed. After pressing this button, press the SPEED SEL button i to select the shutter speed. (See page 30) This button cannot be operated in the slow shutter mode. iSPEED SEL button After pressing the SHUTTER button h or when the slow shutter mode is established, press this button to select the shutter speed. (See page 30) jCH1 SELECT switch This switch is used to select the input signals which are to be recorded on the audio channel 1 track. INT (L): Audio signals of the left (L) channel of the internal microphone INPUT1: Audio signals which are input to the INPUT 1 connector INPUT2: Audio signals which are input to the INPUT 2 connector kCH2 SELECT switch This switch is used to select the input signals which are to be recorded on the audio channel 2 track. INT (R): Audio signals of the right (R) channel of the internal microphone INPUT2: Audio signals which are input to the INPUT 2 connector lINPUT 1 switch (MIC POWER +48 V) When this switch is set to ON, +48 V power (power supply for the phantom mic) is supplied to the INPUT 1 connector. mINPUT 2 switch (MIC POWER +48 V) When this switch is set to ON, +48 V power (power supply for the phantom mic) is supplied to the INPUT 2 connector. 16