Panasonic AG-HPX250PJ Operating Instructions - Page 143
Audio Setup Screen, Setting, Notes, Limiter Ch1, On, Off, Auto Level, 25m Rec Ch Sel, Test Tone
View all Panasonic AG-HPX250PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
AUDIO SETUP screen Item Setting Notes LIMITER CH1 Sets the CH1 limiter. ON, OFF • When the AUDIO AUTO/MANU CH1 switch is set to AUTO and auto adjustment mode is active, the limiter is disabled regardless of these settings. LIMITER CH2 Sets the CH2 limiter. ON, OFF • When the AUDIO AUTO/MANU CH2 switch is set to AUTO and auto adjustment mode is active, the limiter is disabled regardless of these settings. LIMITER CH3 Sets the CH3 limiter. ON, OFF • When the AUDIO AUTO/MANU CH3 switch is set to AUTO and auto adjustment mode is active, the limiter is disabled regardless of these settings. LIMITER CH4 Sets the CH4 limiter. ON, OFF • When the AUDIO AUTO/MANU CH4 switch is set to AUTO and auto adjustment mode is active, the limiter is disabled regardless of these settings. AUTO LEVEL CH3 Selects the method for setting CH3 level. ON: Engages the auto adjustment mode. (The limiter is not available.) OFF: Locks the level. AUTO LEVEL CH4 Selects the method for setting CH4 level. Same setting as AUTO LEVEL CH3. ON, OFF 25M REC CH SEL Selects the audio channels to be recorded in the DVCPRO • Not available in the following and DV formats. conditions. 2CH: Only recorded on CH1 and CH2. 4CH: Records on all four channels. · When SYSTEM MODE is 1080-59.94i (50i) or 72059.94P (50P). · When SYSTEM MODE is set to 480-59.94i or 576-50i and REC FORMAT is set to the DVCPRO50 codec. · REC SIGNAL is set to 1394 (operation depends on 1394 input status). · W hen compiling to a clip in one-clip recording mode. TEST TONE Selects the test signal. LEVEL1: A 1 kHz test tone is output during color bar output. LEVEL2: Outputs the above test tone at a volume lower than LEVEL1. OFF: Does not output a test tone. Menu ___indicates the factory setting. 143