Panasonic AG-HPX250PJ Operating Instructions - Page 54
Adjusting the recording level
View all Panasonic AG-HPX250PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Switching audio input (continued) Adjusting the recording level AUDIO LEVEL knob (CH1, CH2) AUDIO AUTO/MANU CH1, CH2 switch Use the AUDIO LEVEL knob to adjust the recording level of the built-in microphone or of audio signals input through the AUDIO INPUT 1/2 (XLR, 3 pin) terminal. • To adjust the volume of the sound for monitoring, see "Adjusting the volume while shooting" (Page 40). To adjust the recording levels for Audio Channels 1 and 2, follow the steps below. 1 Set AUDIO OUT on the setting menu AUDIO SETUP screen to CH1/CH2 and confirm that the display is 1, 2, so that the audio level meter display indicates CH1, CH2. 2 Position the AUDIO AUTO/MANU CH1, CH2 switch at MANU. 3 While checking the audio channel level meter in the display window or the audio level meter in the viewfinder, adjust the AUDIO LEVEL (CH1, CH2) control. • Note that if the level exceeds the top bar (0 dB), the word OVER illuminates to show that the input level is excessive. Adjust so that maximum sound levels do not reach the 0 dB bar. C H 1 C H 2 OVER indication Pressing the USER button to which the magnification of the audio level meters (MAG A.LVL) has been assigned magnifies the audio level meters. • "Audio level meter magnification" (Page 55) • The CH1 and CH2 characters are highlighted (they will appear in white text) when INT MIC on the AUDIO SETUP screen is set to ON. C1 C1 H H C2 C2 H H INT MIC ON INT MIC OFF Check the recording level prior to shooting. • The recording level is set higher than for Panasonic's broadcast-use camera-recorder recorders (AJ series, AG-HPX500, 370 or 300 series). 54