Panasonic AG-HPX250PJ Operating Instructions - Page 145
OUTPUT SEL screen
View all Panasonic AG-HPX250PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Menu OUTPUT SEL screen Item SDI & HDMI SELECT SDI & HDMI CHAR SDI OUT SDI METADATA SDI EDH DOWNCON MODE VIDEO OUT CHAR VIDEO OUT ZEBRA TC IN/OUT SEL Setting Notes Sets the type for the signal format output from the SDI OUT and HDMI OUT terminals. 1080i/720P: Follows 1080i, 720P settings of SYSTEM MODE. 1080i*1: Outputs at 1080i even when SYSTEM MODE is set to 720P. DOWNCON: Down converts to SD signal and outputs. • Not available when SYSTEM MODE is set to 480-59.94i, 576-50i. Selects whether or not to superimpose characters on images output from the SDI OUT and HDMI OUT terminals. ON, OFF Selects video output from SDI OUT or HDMI OUT terminal. ON: Video is output from the SDI OUT connector. OFF: Video is not output from the SDI OUT connector. Sets metadata (UMID) superimposition onto SDI OUT. ON: Superimposes metadata. OFF: Does not superimpose metadata. Sets EDH superimposition when SDI OUT is an SD signal (480i, 576i). ON: Superimposes EDH. OFF: Does not superimpose EDH. Sets downconverter output (VIDEO OUT and DOWNCON • Not available when SYSTEM SDI OUT) in HD mode (1080i, 720P). MODE is set to 480-59.94i, SIDE CROP, LETTER BOX, SQUEEZE 576-50i. Specifies whether or not characters are superimposed on VIDEO OUT signals. ON: Superimposes characters. OFF: Does not superimpose characters. Specifies whether or not zebra pattern is superimposed on VIDEO OUT signals. ON: Displays a zebra pattern also on images output via the VIDEO OUT connector. OFF: The zebra pattern is not displayed in video output from the VIDEO OUT connector. Selects whether to use the TC IN/OUT terminal for input (TC IN) or output (TC OUT). TC OUT, TC IN *1: Use this to check video when SYSTEM MODE is set to 720-59.94P (50P) and 1080i is selected. ___indicates the factory setting. 145